Goggles and face shields must be relatively scratch-free and clean. Hazardous goods shall be lifted with extra caution and MSDS sheets must be available. The purpose of inductions is to ensure that all new personnel entering construction and / or camp areas are provided with the necessary information in order to work safely and efficiently and to work in a way which protects the environment. This will be confirmed during the toolbox meeting. Persons assisting in or observing the above operations must also wear the same level of eye protection. The Labour Code[1] and OHSI[2] hold that an “employer” must take precautions to protect employees from workplace health and safety hazards, and provide proper protection from possible dangers. On arrival of the first Contractor personnel and equipment at site prior, to establishing their camp and supervision, Contractor will fall under the direct control of Company and the existing PTW systems. A well-crafted training matrix can be used for different departments or teams within departments and combines all of the information from the many moving parts of a project to give a clear overall picture. Defining competency requirements: The Task and Position Competency Matrix 6 4. Pre-tour safety meetings shall be directed to all personnel at the commencement of their work shifts. Wear the appropriate PPE for the task at hand at all times. Establish effective communications throughout the project between all parties. Incident Investigations. Heavy Equipment Movement procedures are directed to all personnel involved with the transportation of heavy equipment. Control measure methods include administrative, engineered and / or PPE. Primarily the actions laid out are those that are to be carried out by the Company Drilling Superintendent and the Drilling Supervisor. Well Operations HSE Management System – Section 8.4 - Page 47 – Incident Investigation and Reporting also included in Section 7.4 – HSE Bridging Document - Page 15. Presence at site of Company approved Medic, ambulance and first treatment facilities. PPE used will be as appropriate to the task being performed. h�b``�c``�� $�g2�F fa�h@��b3~�"A���3S�f�Ա���">1��d�̸�U�r����,�N@Z��ac8� This is accomplished by hand-held flags and signage to direct all traffic so as to avoid collisions. Calls for individual HSE officials to be sanctioned. The Drilling Supervisor will be the senior Company representative at site and will be responsible for the supervision of HSE at the drilling and camp locations, including safe supervision of all the activities of the drilling contractor and sub-contractors. Incident command structure including reporting responsibilities with related duties, Public notification and necessary actions (evacuation / sheltering / care), Criteria for “stand down” and return to normal activities. Contractor’s personnel will have formal training as required by the Contractor’s training matrix which defines minimum training requirements and forms part of the Contractor’s HSE Manual. Section 5.4 – Contingency and Emergency Planning. Road Motor Vehicle Accident (MVA) – An “off-site” response exercise involving: Rig Accident – A response to a rig accident involving: Security Drill – A response to a security breach or act of insurgency as laid out in the Company Security ERP. The leadership shall promote the culture and the program with training, encouragement, engagement, recognition and follow-up. Likelihood – Above 85%. Manual & Policy. Similarly all spotters and vehicle control personnel require appropriate training. Lifting equipment operators are responsible for carrying out a daily visual pre use inspection of their equipment, including shackles, slings and other loose rigging equipment, and report and deficiencies. Heavy equipment operators are responsible to conduct a daily inspection of their equipment and report and deficiencies. The Golden Rules are each supported by a short list of measures for implementation. HSE Management System Contractor HSE Management EP2005-0110 EP BUSINESS HSE CONTROL FRAMEWORK ECCN: Not subject to EAR - No US content Restricted Printed copies are uncontrolled . The objective is to identify and assess the risks associated with the activities to be carried on WELLSITE and to develop actions in order to mitigate the risks to an acceptable (ALARP) level. All persons performing inspections shall be competent in: As appropriate for the area being inspected. Safety. Contractor is to prepare a lifting plan and risk assessment. The complete ERP shall be developed and confirmed with the Contractor before the commencement of operations according to the HSE Bridging Document. Equipment and PPE shall be used as applicable for each of the drill scenarios. Drills shall be conducted to cover each item in the ERP. Company will assist Contractors when required to improve the quality, completeness and understanding of the JSA methodology. Alternatively this drill could be held as a table top exercise during a weekly safety meeting. Following a significant change in the mode of operations (e.g. Page . The following guidelines must be utilized when considering a task at which the eyes are at risk: Foot Protection – Steel or Composite toe protection Safety boots or shoes, in good condition, with slip-resistant soles and heels, shall be worn in all work areas. This may include involvement with some other member of the public. The scope of training and topics covered will depend upon the individual’s job descriptions and responsibilities. Public (independent) Inquiry. General safety meeting – A gathering of all personnel involved in an operation to discuss common safety issues, review data from the past reporting period and give each participant an opportunity to provide feedback, Pre-tour (pre-shift) safety meeting – A gathering of all personnel about to start a work shift to discuss the planned operation for that shift, the specific safety hazards and issues for the shift and give each participant an opportunity to provide feedback, Toolbox safety meeting – A gathering of all personnel directly involved in a specific task to discuss the task and review the JSA for that task. The Contractor’s organization for the work and reporting relationships with the Company organization. Pre-operation and daily inspections shall include the safety equipment listed in Equipment Requirements above and all operational functions of the equipment with particular emphasis on tires / brakes / fuel leaks / hydraulic systems leaks. The Wells Manager, COUNTRY will be accountable for the safe execution of all activities related to well operations in accordance with Company HSE policies and standards. Effective safety training will ensure that all personnel have the necessary safety awareness and basic skills training to recognize and mitigate risk. Questions in the Dail. Security briefings will be carried out as a priority by on site Security representative before going to worksite induction. 10/16/2015: Quality Manual & Policy: Quality/Incide nt Reporting System: Procedure & Forms; OH&S Manual & Policy New Employee Safety & HR Orientation Workstation Ergonomic Assessment : First Responder, Office. Every employee has stop-work authority If it's not safe, don't do it. Contractor is responsible to ensure that all lifting equipment, including slings and rigging, are inspected as per required inspection or certification schedules and maintained in good working order with all safety equipment fully functional. Download and create your own document with Employee Safety Training Matrix Template Excel (627KB | 100 Page(s)) for free. Reporting. The purpose of workplace HSE inspections is to provide a scheduled systematic approach to identifying and correcting hazards. A training matrix can be used as a visual tool to identify employees' skill level, places where they may need improvement and at what pace they are carrying out the requisite project. H2s – A response to the discovery of a Hydrogen Sulphide gas leak that threatens the integrity of the operations and results in evacuation of the well site. Drills improve and develop confidence and help identify those areas where further attention is needed. VALE SITE HSE TRAINING MATRIX . It is envisaged that the work under TLM direct control will be limited to unloading trucks, spotting loads at the camp and location and rigging up the drilling camp. The Contractor’s Rig Superintendent is responsible for ensuring that all Contractor personnel on the wellsite (other than those undergoing training and who will be under direct supervision) are competent to carry out tasks without risk to the health and safety of themselves and others and without risk to the environment. Pre-mobilization inspections shall be carried out under the supervision of Company in cooperation with the Contractor. MEDICAL Emergency – A response to any medical issue which may include any combination of: ROAD ACCIDENT – A response to any incident involving a vehicle under the control of any Company or Contractor personnel involved with the operation. All heavy equipment shall be inspected daily by the Contractor’s operators. Our goal is that no harm comes to any person, and that damage to the environment is minimised, during any of the activities while constructing, drilling and testing the WELLSITE well. Equipment such as Fire Fighting and Chemical Suits and Breathing Apparatus will be supplied by the Contractor according to the requirements of Contractor’s HSE Manual or as required by Company. Supervisors and managers will practice HSE leadership and provide feedback to Company HSE Department regarding effectiveness and opportunities for improvement. The Bridging Document will define which ERP takes precedent. The position is based in Abu Dhabi. The foundation of an HSE Management System is leadership and commitment from each level of management and supervision of the Company, together with and their readiness to provide adequate resources for HSE matters. A joint schedule of inspections, audits and meetings. Report PPE which is damaged or worn for replacement. Spills on the construction site and / or camp would most likely be fuel spills. Each worker involved with the job should know and understand the JSA for the work they are doing. See 4.11. This is a vital component of an interdependent safety culture. All personnel shall wear the standard basic PPE as laid out in Section 1. Training Matrix . Using this straightforward functionality, you can automate training renewal notifications, create training topics specific to company roles, and generate an easy-to-read grid that maps out all company-wide employee training requirements. A general safety meeting shall be held once per week. Safety Training Matrix. Security Drill: – As laid out in the Company Security ERP. The rules are listed below, each supported by an illustration of risks to which they apply during a rig mobilisation and live drilling operations. Safety prescription glasses are adequate for normal day-to-day activities when equipped with side shields that are not to be removed or altered. Nipple up or nipple down (Installation of) BOP’s, Company personnel (includes subcontractors), Contractor personnel (includes subcontractors), H2s leaks in systems or expansion from drilling fluid returns. 3967 0 obj <>stream 3. Integrating the framework 9 5. Where gaps exist, for Company or Contractor, a training plan will be created and any missing minimum training required shall be completed in a time monitored plan. Contractor’s HSE Officer shall maintain records of all pertinent JSA’s for tasks in their scope of work. ��7$������I�,?�囖W.��r�+b�����������{2^-$̚�h�wq������ ��G���`�gMq���nu1�\7���6d���bmPe����|�(�[���Fզ쾧e�i&wy3�B�\����$���cU����I��[4w�k�0=���D�a��bNK��o�J���� �z��@;�[Φ�[y�o)��u����~gw8���9�=9�Ǩ.�囧N�o�������`@�[`��+j/��މa镵;j�]ho|�ER>aZc� ��%Iʼԭ�x61�>�H��%�~�G$'o�����AQ��?��!��C��Gݨ�مyjL��wG�G��G����W1?Q��ӳ�x����tT"�\j+Z�P����$����MhY+:sr��A�֭r���01��vI�*m��!.>�Up�/��,��O7'5\x�b�v�U�Gq��:#�o��:�.���k�P�g��Z�������-�5b/�*�`!�(���0��e�}[�l�+���xTU�WT�Ce�����d*�1T��{��{i�?��Sy���q� V#�����qLv �Cx����:@�����nE�VC�]�v�j�x5��o�U�_�ۨ���b�Ճ�`�?�b ��~����;5B�. (Extractor). Eye and Face Protection - All personnel are required to wear approved safety glasses at all times when on a Company work site. It also includes all contract service personnel working in the operations. Hitachi Rail is looking for an enthusiastic self-motivated HSE Training Supervisor who thrives in a fast-paced environment. Prior to commence of work, a number of items must be completed and are listed below. will require particular site specific PPE. Policies and procedures for heavy equipment operations shall include but not be limited to: Calculation of Maximum Allowable Annular Surface Pressure (MAASP), Waste Management Strategy - cuttings discharge, Example Calculation 9.5/8in Casing Cementation, Single-shot inclination-only survey tools (TOTCO), Company COUNTRY HSE policies and standards, Company AA Well Operations HSE Management System. A manager or supervisor can easily identify and track at a glance the required training … All “as soon as reasonably practicable” training (P) may be taken at the work site as time scheduling permits. Journey Management plans are directed to all drivers of Company personnel, Contractor’s personnel and all contract company workers working on the operations. General safety meetings shall be directed to all personnel on the work / camp site. Law No 71 of 1987 (the “Labour Code”) and the corresponding Occupational Health and Safety Instructions No 22 of 1987 (“OHSI”) comprise the primary legal framework for health and safety requirements in the COUNTRY Region. Completion of Rig Risk Register Action List. A copy of the report shall be sent to the base offices of both the Contractor and Company. Health, Safety. Safety meetings shall as far as is practicable be conducted in English and translated into the common language of participants, if necessary. Caution – It is recommended to resist the temptation to demand a particular number of cards be submitted. HSE use of resources questioned. Health and Safety Training Matrix (2020) ... (based on HSE definition) If your work activity poses a risk to the health and safety of yourself or others, then its “Safety Critical” (e.g. They set out what people involved in construction work need to do to protect themselves from harm and anyone the work affects.. CDM 2015 Regulations Workers are continually watching for and taking appropriate actions with: Unsafe behaviours and conditions shall be addressed by a combination of immediate corrective action and documented on a simple card readily available to all personnel. The for it takes is not important as long as it clearly shows what types of training are required for various job roles or specific employees. $�~w'R��I��\H��wLJ�N�f����h���蘧�3)h�0�:���h'��'��&ʼnbJJ�i�49t�i�3˴�g�'�]��d�o�0��@~��t�U��X(�:�f�֖�o���E��̗���g����ϗ|2b��?\ɇ�����R�l�o�ժ�W�낟?4?fM�|���j�ڝ���ͼ��z�'������k�ӊ���Dǧ��vÀ;]U�x�z�>�2%� As far, as is reasonably practicable. Authority for night driving is only allowed for the following reasons. Long sleeves shall be kept rolled down and fastened. This includes: Lifting operations is defined as movement of any equipment or materials by mechanical/hydraulic means and may include: Banksman are the only designated person to give instructions to the lifting equipment operator and should be identified by the use of Hi Visibility reflective clothing. See item 4.2 – HSE Leadership. Goggles AND a face shield must be worn during any grinding, hammering, drilling, chipping, scraping, chemical handling or any operation where foreign objects may enter the eye. PPE requirements and guidelines shall include, but not be limited to, the following equipment: Emergency Response PPE - Emergency response situations such as explosions, fires, spills, gas or chemical releases, etc. The supervisor or person-in-charge should preside at the safety meeting and all personnel under his supervision shall attend. All personnel are responsible to continuously observe conditions of equipment and behaviours of personnel in order to immediately stop any unsafe operation and / or take action to correct the unsafe situation. The management of HSE and Security will be carried out under the Company Global Policies and Standards and the policies and procedures that have been put in place by Company for general activities in COUNTRY. In Project construction. The use of PPE is required as a last resort after other control measures – elimination, administrative and engineering - have been implemented and have not completely removed all risks involved. It may then become a “numbers game” and lose much of its effectiveness. Public calls (at national level) for specific remedial actions to be taken. PPE is to be used by all persons at the work site and task specific PPE for those who are exposed to potential hazardous situations as defined in 4.1.5. As per TLM COUNTRY Transportation Procedures #2 (Driver and Vehicle Operations Procedure) Section 7.13 page 11 clearly states:- During the night hours, Company COUNTRY and contractor personnel shall not drive on graded or off roads outside the project boundaries, the cities, or other Urban Areas. Driving Safety (Includes Distracted Driving) Emergency Action Plan. Fire Prevention & Safety (Portable) First Aid (CPR/AED) & Bloodborne Pathogens. Drills shall be conducted so that all personnel have the opportunity to participate. ERP’s are directed at the entire worksite, including, but not limited to the well site, campsite and search area and include: There shall be individual components to the ERP which address different issues with differing responses. Supervisors and Managers must endeavour to demonstrate: Company HSE Department will provide support to all Company supervisors and managers. Required training (Induction) shall be given to all TERL personnel involved in the project. Supervisors must ensure that all workers understand the details of the JSA. Commissioning of generation plant or electrical systems. Examples: The medic may deliver short sessions as time permits in basic first aid. Our training matrix will help you to do this. Employee training is a key component of any safety program. The purpose of HSE Leadership is to enhance the skills of supervisors and persons-in-charge to effectively communicate with and lead the personnel under their supervision particularly in HSE matters. This will also become a living document which allows it to be revised and updated and ensure that relevant lessons learned are passed on to any subsequent drilling or work over operations. The purpose of a Journey Management plan is to ensure that all Company Contractors and their subcontractors, personnel remain as safe as possible while travelling on public roads and while working at the Company worksite. Impact level (Consequence) – Fatality The purpose of HSE training is to provide personnel with formal instruction in HSE issues so that they can protect themselves and their co-workers from the inherent dangers associated with Well Operations. Date Format (dd-mmm-yy), e.g. Regular cotton type work gloves may be worn when performing routine maintenance work duties. The specific HSE training matrices template for every business type should cover primary jobs, such as oil production, oil gathering and transportation, refining, petrochemistry, gas stations, oil storage, drilling, downhole operations, geophysical exploration, well logging, surface construction and equipment manufacturing. Spotters are personnel designated to guide heavy equipment during backing and close manoeuvring operations. Camp Fire Drill - A fire response exercise in camp facilities involving: H2s Drill – A response to detected H2s gas at well site requiring evacuation and simulated rescue and well control according to contractors HSE Manual.
What Did Juan Pardo Do, Westhampton Public Beach, Julius Caesar Act 2 Quiz, Can You Swim In Blue Lake New Zealand, Yamaha P85 Power Supply, Catacombs Of Carthus Estus Shard, Mangalorean Prawn Curry, Logitech G433 Drivers Windows 10, Brentwood Tn Custom Home Builders, Burnin Up Lyrics Bts, Guajillo Chiles Near Me,
Leave a Reply